一.Soft woodchips for pulping use .
制浆用针叶木片
二. WOODCHIPS SPECIFICATIONS AND QUALITY
木片规格及质量
1.1 Raw material must be clean and fresh cut. Burned wood, metal, stone, sand & mud are not allowed to be shipped.
原料必须是新鲜的、干净的。装运的木片不允许有火烧材、金属、石块、砂子或泥土。
1.2 The woodchips specifications:
Length (Along fiber direction): 4.8mm-45mm 长度(沿纤维长度):4.8mm-45mm
Width :4.8mm-45mm 宽度:4.8mm-45mm
Thickness:2mm-8mm 厚度:2mm-8mm
Oversize:5% max and undersize: 3% max
超规格的: 不超过5% 低于规格的:不超过 3%
Oversize Not more than 5% by weight,exceeding 5% weight deducted 100%
4.8mm-45mm Not less than 92% by weight
Undersize Not in excess of 2% by weight,exceeding 3% weight deducted 100%
Bark/Rot Not in excess of 1% by weight,exceeding 1% weight deducted 100%
Other kind non-softwood chip to be 100% deducted.
超规格的 重量不超过 5% ,在 5% 以上的,超出部分重量应减去 100% .
4.8mm-45mm毫米 重量不小于 92%.
低于规格的 重量不超过 2% ,在2% 以上的,超出部分重量应减去 100%.
树皮和朽木部分 重量不超过 1% ,在 1% 以上的,超出部分重量应减去 100%
若有其他非针叶木种类的木片 100% 扣除
1.3 The Woodchips shall not contain any illegally harvested wood.
木片不应该含有任何违法砍伐的木材。
1.4 If the bark content exceed 1%, all additional charge including but not limited the charges of returning the goods to loading port to be covered by the Seller.
如因树皮含量超过1%的,在目的港产生的一切额外的费用包括但不限于退运货物到起运港的费用由卖方承担。
三.Discharging port: XIAOCUO QUANZHOU, CHINA.
卸货港:中国泉州肖厝港
四. 联系人:黄辉胜,电话:13605973611.
福建省金皇贸易有限责任公司
Fujian Jinhuang Trading Co., Ltd
2012年3月15日